RS Security Co., Ltd.
Model No.: RS 702
Application: Hospital, Parking, Hotel, Company, Community
Warranty: 1 Years
Width (mm): 460mm
Height (mm): 400
Brand: RS Security
Place of Origin: Shenzhen city, Guangdong province
Supply Ability: 500pcs/month
With the touch of your remote control lower your automatic parking lock or Parking Barrier to lay flat,allowing you to drive your vehicle into your parking apace.
Do not touch the parking lock when the automobile is going in and out of the parking lovk. The parking lock is suggested to be installed in the middle of parking lock entrance.
The lock is required to be installed on level and dry cement ground.
A.Roate the with manual crank to raise the rocker,open the lock with key.Open uper cover to install the lock
B. Drill three holes and install M8 expansion bolts according to the locations of three installation holes on the parking lock foundation.
C. Cover three foundation spacers on the expansion bolts. and then cover parking lock foundation. install and tighten the bolts to finish installation.
D. When using the lock, open the upper cover and insert the battery plug to the parking lot socket.Then set the battery level.
E. Install the upper cover. Keep the upper and lower fixed blocks joggling (Hold the back of upper cover to push forward. as indicated in the schematic ),the lock the upper cover.