RS Security Co., Ltd.
Model No.: RS 1009
Type: drop arm turnstile
Control Mode: Automatic
Communication Interface: RS485, TCP/IP
Housing Material: 304 Stainless Steel
Control Method: Bidirection Control
Arm Length: 450-600mm
Model: RS 1009
Packaging: plywood packing box
Productivity: 3000 pcs
Brand: RS Security
Place of Origin: Shenzhen city, Guangdong province, China
Supply Ability: 500pcs/month
HS Code: 8608000900
Keywords: Turnstile , Tripod Turnstile, Security Turnstile, safety turnstile, Turnstile Gate , Access Control turnstile, access control Gate , access gate,Entance turnstile, Entrance gate, wing Barrier , Swing Barrier , Flap Barrier , security wing barrier, safety wing barrier, access wing barrier, access barrier, auto gate, arms gate, arms turnstile, rotate gate, rotate turnstile gate, arm fall turnstile gate, pedestian access gate, traffic gate, Waist Height Turnstile, Half Height Turnstile, Full Height Turnstile, Speed Gate , vertical type tripod turnstile, bridge type turnstile
Drop Arm Turnstile offers a compromise between the stricter security of a tripod turnstile and the openness of an optical turnstile.
Single arm turnstile applies for one direction or bi-directional entry and exit passage.
◇Bus station, yard, tourism entry and exit passage
◇Community, factory, company attendance, door access management
◇bicycle, motorcycle, disabled passage
Features and functions:
1. Fault detection and alarm functions, easy to use and maintenance.
2. The running status can be programmed and controlled with the built-in keyboard on the main board.
3. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop working automatically within the prescribed time and reset again after the default delay (till fully reset).
4. Anti-breakthrough function. The arms are locked automatically until opening signal received.
5. Synchronization functions (for dual gate equipments).
6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds), the system will cancel the authority of the current user automatically.
7. Passage can be set as normally open or normally closed.
8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access Controller needed)
9. Direction can be set as single-direction or bi-direction.
10. LED direction indicator.
11. Arms auto drop when power off and auto rise when power on, complying with fire safety requirements.
12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.
13. Counter function (optional).
14. Support infrared photocell for anti-pinch and reset function (optional).
|1||Product Name||Automatic Swing Barrier Gates|
|2||Environmental Temperature||-20℃~ +70℃|
|4||Operating voltage||110V/220V AC 50Hz/60Hz|
|5||Operating power||80 W|
|6||Active distance||3 ~ 8 m|
|9||Passage width||450-600 mm|
|11||Material||304 stainless steel|
|13||Starting-up time||3 s|
|14||Switching time||1 s|
|15||System boot time||3 s|
|16||Transit speed||30-45 people/minute|
|17||Working life||5 million|
|19||Direction||Unidirectional ,Bidirectional (optional)|